Insert the battery
Refer to the drawing, take the back cover of the remote control off
and remove the empty battery receptacle.
Prior to shipping, a separating film was applied to the battery.
Remove this film.
Insert the battery into the receptacle and insert the receptacle into
the remote.
For the best results,aim the remote towards at the player, receiving
window. Stay within 15 feet and angles of 60 degrees or less.
Under normal use the battery will last for one year.
Remove battery during storage or when you are not using the DVD
player for a long time.
Identification of Controls
5
*To return to the MAIN MENU
---Press
EXIT
button.
*To finish the setup operation
---Press
MENU
to exit from Main Menu screen.
Chapter 2-1 First Time Installation
First Time Installation
No channels are stored in your
unit. A First Time Installation
Wizard will appear automatically
on the screen. Continue with the
OSD (On-Screen-Display) to do
the following setting.
1
A First Time Installation Wizard appears. Press
¡°
¡±
to
select
¡°
YES
¡±
.
2
Press
¡°
¡±
button /
¡°
¡±
button to select the item you
wish to set up, and then press
¡°
¡±
button /
¡°
¡±
button to
switch to your preferred setting.
3
Press
¡°
¡±
button /
¡°
¡±
button /
¡°
¡±
button /
¡°
¡±
button to select
¡°
NEXT
¡±
, and then press
¡°
¡±
to
continue to the next page.
4
To start Auto Search, press
¡°
¡±
to select
¡°
YES
¡±
.
All the receivable programs (including TV and Music) will be
listed respectively on the screen.
This process may take a few minutes to be done.
5
After Program Search is done, press
¡°
¡±
button /
¡°
¡±
button to select and start watching TV programs.
CH
OK
OK
CH
OK
