Making Phone Calls via a Bluetooth Compatible
Device
Once the Bluetooth compatible device has been paired with the speaker, phone calls can be
made.
STEP 1:
Use the Bluetooth compatible device, dial the number to be called and select the
Bluetooth/hands-free option. The speaker and its built-in microphone will now act as a
hands-free device.
STEP 2:
To connect or disconnect a call with the speaker, press ' '.
STEP 3:
The volume of the phone call can be controlled by either the speaker or the
Bluetooth compatible device.
STEP 4:
To reject an incoming phone call, press and hold ' ' for approx. 2-3 seconds.
Aux. Mode
Connect one end of the line-in Aux. cable to the Aux. input port on the speaker and the
other end to an MP3 player or other compatible audio source.
The speaker will automatically switch to Aux. mode once the line-in Aux. cable has been
inserted.
Note:
Sound can now be controlled by the relevant controls on the compatible audio
source; the speaker cannot be used to skip tracks during Aux. mode.
If the speaker does not automatically switch to Aux. mode when the line-in Aux. cable is
inserted, press '
M
' until it is selected.
Micro SD Card/USB Mode
STEP 1:
To use micro SD card mode, insert a micro SD card (not included) into the micro SD
card slot. The speaker will automatically switch to micro SD card mode.
STEP 2:
To use USB mode, insert a compatible USB drive into the USB port. The speaker will
automatically change to USB mode.
STEP 3:
If the speaker does not automatically change to micro SD card or USB mode, press
'
M
' until the desired operation is selected.
Note:
Once connected, sound can be controlled by the speaker.
No USB drive should be inserted whilst using micro SD card mode or vice versa, as this could
interfere with playback.
The speaker will only recognise MP3 audio files; if other file formats are present on the
Micro SD card or USB drive, this may prevent the speaker from playing.
Troubleshooting
The speaker has no power.
The speaker has run out of charge. Charge the speaker following the instructions in the
section entitled 'Charging the Battery'.
The speaker has no sound.
The volume level is set too low. Check that the volume level is set at an audible level and
adjust accordingly.
The speaker is not paired with a Bluetooth compatible device. Follow the instructions in the
section entitled 'Bluetooth Mode'.
