Instructions for Charging the Battery
The speaker is fitted with a 3.7 V 1200 mAh rechargeable battery (non-removable). It is
recommended that the battery is fully charged before first use; this will take approx. 4
hours.
Connect the micro USB end of the USB charging cable into the 5V
charging port on
the back of the speaker and the other end to a compatible USB port.
Whilst charging, the charging indicator light will become red. Once the battery has been
fully charged, the charging indicator light turns off.
Carefully disconnect both ends of the USB charging cable and store it safely for future use.
Using the Bluetooth® LED Speaker Basic Functions
Turn on the speaker by turning the on/off switch to the on position.
Pause a track by pressing ' '; push it again to resume the track.
Adjust the volume of the speaker by pressing'+' and '-'. Press and hold'+' to increase the
volume; decrease the volume by pressing and holding '-'.To switch to the next track,
press'+'; play the previous track by pressing '-'.Cycle between modes by pressing '
M
' until
the desired operation is selected. Turn the on/off switch to the off position to turn the
speaker off.
Modes
The speaker must be turned on before using any of the following modes.
Using the Colour Changing LED Lights
The LED lights will automatically activate when the speaker is turned on and can be
controlled by using '
M
'. Press '
M
' twice rapidly to cycle between different light modes.
MODE 1: Colour Changing Mode
MODE 2: Off
Bluetooth Mode
Pairing with a Bluetooth Compatible Device
STEP 1:
Once the speaker has been turned on, a voice prompt will signal it is ready to be
paired with a Bluetooth compatible device.
STEP 2:
Search for the speaker with the Bluetooth compatible device. Select '000' to connect
and pair. Once a pairinghas been made; the LED lights will flash rapidly and a voice prompt
will signal that the devices are paired.
STEP 3:
To unpair or remove a Bluetooth compatible device from the speaker, turn off the
Bluetooth function on the compatible device. The speaker can now be paired with a new
compatible device.
Note:
Once devices are connected, sound can be controlled by either the speaker or the
relevant controls on the Bluetooth compatible device.
