Wake to Radio
Press the SKIP+ / SKIP- button until “rad” is shown in the display. At the set time the alarm will go on at
the radio station you last listened to.
Wake to CD
Press the SKIP+ / SKIP- button until the “Cd” is shown in the display. This feature only works when you
have a CD inserted in the CD drive. This CD will be played at the set alarm time
1. Press the ALARM button again to confirm your settings for Alarm 1.
2. The alarm icon (AL2) appears and the HOUR time is blinking.
3. Repeat step 2-5 in order to set Alarm 2.
To select which of the 2 alarms should be active, press the ALARM button repeatedly while the unit is in
standby mode (clock display). The display will show consecutively the AL1 icon, the AL2 icon, the both
Alarm icons. Press the ALARM button once again to deactivate the alarms (no alarm icon will be
displayed).
SNOOZE FUNCTION
If you want to snooze a few more minutes, press the SNOOZE button, it will deactivate the sound for 9
minutes and will shown “SNOOZE” on the LCD Display. To turn off the snooze function, press the
STANDBY button.
Turning Off the Alarm:
To switch off an alarm while active, press the STANDBY button, the alarm will reset for next day
RADIO OPERATION
1. Press the STANDBY/FUNCTION button on the unit repeatedly, until the frequency shown on the
display
OR, press the STANDBY button on the remote to turn on the unit, then press the FUNCTION button
on the remote until the frequency shown on the display
How to use the buttons for radio
Manual Tuning
• Press the SKIP+ / SKIP- button to search for desired frequency.
• Automatic Tuning
i) Press and hold the SKIP+ / SKIP- button until the display frequency starts run.
ii) When a station of sufficient strength has been found Tuning will stop or you can stop the automatic
tuning by pressing SKIP+ / SKIP- button.
2. To switch off the radio, press the STANDBY button on the remote once OR press and hold the
STANDBY/FUNCTION button on the unit, until the normal time shown on the display.
PRESET TUNING
1. Select your desired station according to the normal tuning procedure.
2. Press the MEMORY button, “P01” will appear and flash in the LCD, Then use SKIP+ / SKIP- button
to change the number where the station will be stored. (P01 to P20)
3. Store the current frequency by pressing MEMORY button again when you get the desired number.
4. Repeat the same procedure to set other desired frequencies into Memory No.1 to NO.20
Note: The unit can be preset up to 20 stations.
ENG-6