Unit Power Supply
This unit is designed to operate on wither AC/DC adaptor.
Operation with AC/DC Adaptor.
Insert the small plug of adaptor into the DC Jack.
Insert the AC/DC adaptor in to any convenient having AC~230V 50Hz household outlet in vertical or
horizontal direction.
TO SET THE CLOCK TIME
In Standby off mode.
1. Press and hold the CLOCK BUTTON on the unit or TIME BUTTON on the remote, the digit will blink
on the display, then press SKIP+ / SKIP- button to desired 24H / 12H, and press the the CLOCK
BUTTON on the unit or TIME BUTTON on the remote to confirm
2. Then press the SKIP+ / SKIP- Button to set the desired HOUR,
3. Then press the CLOCK BUTTON on the unit or TIME BUTTON on the remote again, the MINUTE will
blink.
4. Press the SKIP+ / SKIP- Button to set desired MINUTE.
5. Press the CLOCK BUTTON on the unit or TIME BUTTON on the remote to confirm
TO SET ALARM FUNCTION
In Standby off mode
1. Press and hold the ALARM button, the AL1 icon and HOUR time will blink.
2. Then press the SKIP+ / SKIP- button to set the Desire Hour
3. Press the ALARM button, The MIN time will blink
4. Then press again SKIP+ / SKIP- to set the Desire Minute.
5. After setting the alarm time as your desired, to press ALARM button again. You can now select
whether the alarm should go on to Buzzer, Radio or CD
Wake to buzzer
Press the SKIP+ / SKIP- button until “bb” is shown in the display. At the set time the alarm will go on
buzzer sound.
ENG-5
Dongguan Guanjin Electronics Technology Co.,Ltd
914419005940102216
Manufacturer’s name or trade mark,
commercial registration number
and address
K05V050120G
100-240V
50/60HZ
5.0V
1.2A
6.0W
75.21%
--
0.06W
Model identifier
Input voltage
Input AC frequency
Output voltage
Output current
Output power
Average active efficiency
Efficiency at low load (10%)
No-load power consumption
