Data ID Codes
To help you identify weights, piece counts, percentages, etc., a code letter
is printed or displayed in front of these values. For example, an “N”
printed or displayed in front of a weight value identifies it as a net weight.
If you set the code for “without data ID code,” only net weights, results in
percent and counting results will be output. You will find the data ID codes
for a particular application program listed in the corresponding
description.
The ID code increases the data output format for each weight readout from
16 to 22 characters.
- without ID code
(Menu Code 7 2 1*)
- with ID code
(Menu Code 7 2 2)
ISO/GLP-compliant Printout or Record
Use of the balance as a test and measuring instrument in quality
assurance systems in compliance with the requirements of ISO, GLP, GMP
and EN (European Standards) in which proof of the balance’s accurate
performance is required. The balance can record all completed calibration
or adjustment operations and print out data in compliance with the
requirements of Good Laboratory Practice (GLP). The balance, interfaced
with a data printer or a computer, can create a document that records the
date, time, serial number and model number, making it possible to clearly
trace data to the balance that generated it and the time at which it was
generated.
Select the ISO/GLP-compliant printout or record mode by setting the
respective code in the balance operating menu:
ISO/GLP-compliant printout/record mode
- Off
(Menu Code 8 10 1*)
- only for adjustment/calibration and linearization functions
(Menu Code 8 10 2)
- always on (e.g., for adjustment/calibration and linearization functions,
application programs, weight readouts)
(Menu Code 8 10 3)
The following menu code setting must be selected in order to obtain an
ISO/GLP- compliant printout/record:
- with data ID code
(Menu Code 7 2 2)
- with application parameter
(Menu Code 7 1 2)
ISO/GLP-compliant printouts/records will not be generated if the
factory setting, menu code 7 2 1 or 711 is selected. In addition, do
not select the “Auto print” data output parameter
(Menu Code 6 1 4 or 6 1 5).
19
Memo:
Note:
