Print Commands
This parameter is coupled with the stability parameter
Print on request = data is output only when the PRINT key is pressed or a
software command is received
Auto print = continuous, automatic data output
- print on request regardless of stability
(Menu Code 6 1 1)
- print on request after stability, with storage of function
(Menu Code 6 1 2*)
- print on request at stability, without storage of function
(Menu Code 6 1 3)
- auto print regardless of stability
(Menu Code 6 1 4)
- auto print at stability
(Menu Code 6 1 5)
Auto Print
You can stop and start automatic data output (auto print function) by
pressing the PRINT key.
- start/stop auto print using the PRINT key
(Menu Code 6 2 1)
- auto print not stoppable
(Menu Code 6 2 2*)
Data Output at Defined Intervals
The menu code for “2 display updates” must be set if you connect the
remote display to the balance.
- 1 display update
(Menu Code 6 3 1*)
- 2 display updates
(Menu Code 6 3 2)
Automatic Taring after Data Output
This convenient setting lets you check weigh a series of samples or
products without having to unload the balance after each weighing
operation.
• the sample remains on the pan after the weight readout has been printed
or transferred to an on-line computer
• the balance is tared automatically after the weight readout has been
printed or transferred to an on-line computer
• you simply load the next sample or part
- data output without automatic taring
(Menu Code 6 4 1*)
- data output with automatic taring
(Menu Code 6 4 2)
Automatic Output of the Application Parameters
After completing an application started by pressing the FUNCTION key,
you can have the application parameters and results printed out or
transferred to an on-line computer.
- Off
(Menu Code 7 1 1*)
- On
(Menu Code 7 1 2)
18
