background image

7

5.

Intended Use

The Electric scooter is neither a means of transport nor sports equipment, but a device for personal entertainment. The Electric
scooter for domestic use only and only by a person aged at least 14 with a maximum weight of 100 kg. The other parameters for

the permissible operation of the Electric scooter are defined in the section (

10. List of parameters

) . Importantly, the Electric

scooter may only be operated in good visibility conditions and only if the physical conditions for stability on the Electric scooter are
met (for example, not on one leg/not under the influence of drugs or alcohol). When operating the Electric scooter, the operator

must wear personal protective equipment specified in the section (

13. Warnings

> 13.2 Preparation

).

6.

Safety Instruction

We recommend always wearing helmet and protective gear like elbow, knee and wrist protectors to ensure your personal

safety.

Also make sure you have read the user manual carefully, to ensure you know how to ride it in a safe and fun way.

The Electric scooter is for domestic use only.

It is your responsibility to be aware of and comply with all regulations in your country. If there are no regulations for this
Electric scooter in your country, please take care of your own safety and the safety of others.

Also pay attention to other people. Always ride safely and only at a speed that allows you to brake safely at any time. A
common thing for such products is that there is a risk that you may fall off the product and injure yourself. Always ride as

safely as possible.

If lending the Electric scooter to friends and family, please make sure they use proper protective gear and know how to
ride it.

Before riding the Electric scooter, please check that all parts are working as supposed to. If any loose parts, abnormal
noise, reduced battery life etc. are detected, please contact your retailer for product service and warranty. Do not repair

the Electric scooter yourself.

Inspect the rear tire, rear brake, and brake pad according to Section 7 of the maintenance specification in this operating
instructions. The Electric scooter may become unstable if the rear brake is deformed or loose. This is because the

distance between the brake pad and the rear wheel becomes too small, possibly leading to a blocked rear wheel.

Avoid applying too much force or stepping on the rear fender permanently. This may cause the fender to loosen or

damage the spring holding the fender.

As a result, the brake pad constantly touches the wheel and the motor temperature increases due to the additional

resistance. The rear tire can also get loose if the brake is in constant braking position.

Avoid constant braking. As a result, the tires will not only wear off, but also become hot. This will soften the rubber and it

will no longer have the same grip on the road as usual. Do not touch the tire after braking.

If you hear unusual noises or notice friction when switching on the Electric scooter, a bearing may be damaged. A worn

bearing may even be indicated by strong vibration of the handlebar. In this case, please contact your retailer since the

bearing needs to be replaced and/or the handlebar checked and adjusted.

Ride the Electric scooter only on a dry surface since otherwise the riding safety and braking performance may be
impaired and the motor or bearings may be damaged.

Please do not ride up or down long and steep slopes.

Stop riding when you receive the "Low Battery Warning". The Electric scooter then moves only slowly and does not have

the same traction as normal and the electric brake does not work. In this case, please use the rear brake to stop the
Electric scooter. Get off the scooter as soon as the speed allows to do that safely.

Do not use the electric brake and the throttle at the same time.

Содержание SEL-65220 MK2






















Отзывы: