20
WARNINGS
Please read the manual completely and the instructions below before using the product.
Product names: SEL-65220 MK2
Product type: Electric scooter
Year of manufacturing: 2021
Note: ONLY use the supplied charger labelled XHK-922-29415 with the following output voltage to charge this
Electric scooter:29.4V
–
1.5A.
Using another charger may damage the product or create other potential risks.
Never charge the product without supervision.
The charging period of the product should not exceed four hours. Stop charging after four hours.
The product should only be charged in temperatures between 0°C and 45°C.
If charging at lower or higher temperatures, there is a risk that the performance of the battery will be reduced and a
potential risk of damage to the product and personal injury.
The product should only be used in temperatures between -10°C and +45°C.
If used at lower or higher temperatures, there is a risk that the performance of the battery will be reduced and a
potential risk of damage to the product and personal injury
Store the product at temperatures between 0°C and 35°C. (optimum storage temperature is 25°C)
Charge and store the product in an open, dry area and away from flammable materials (i.e. materials that may burst
into flames).
Do not charge in sunlight or near open fire.
Do not charge the product immediately after use. Let the product cool down for one hour before charging.
If the product is left with other persons for example during a holiday period, it should be partially charged (20-50%
charged). Not fully charged.
Do not remove the product from the packaging, charge it fully and then put it back into the packaging.
When shipped from the factory, the product has often been partially charged. Keep the product in a partially charged
state, until it is going to be used.
DENVER ELECTRONICS A/S
Omega 5A, Soeften, 8382 Hinnerup, Denmark
