11
●
All parts and materials of electric scooter cannot be changed, modifications of the
scooter are not allowed. If done, then warranty is void.
●
Storage and cleaning
If your Electric scooter gets dirty, please clean it with a damp cloth only, you may not use
pressured water-gun or running water, as this could damage vital parts. It is also possible
to use a little toothpaste if the dirt is stuck. Remember to clean with damp cloth after this.
Please make sure to keep the electric scooter turned off while cleaning it, and make sure
to cover the charging input to avoid problems with the electronics.
Make sure to dry the scooter with a towel, should it become wet.
Please notice:
Do not use alcohol, gas, kerosene or other corrosive and volatile chemical
solvents. This can damage both the appearance and the internal structure of the electric
scooter.
Please store your Electric scooter in a dry and cool environment when not in use. Avoid
leaving it outdoors, as it is not made for storing in wet areas. Nor is it good to expose to
high temperatures caused by direct sun for a long time.
8. Operational control
For better operation, please read the instructions carefully.
8.1
Button
Speed up button
Power button
Speed down button
Accelerator button
Electric brake
button
