DENTSPLY Clamus DUAL, Руководство пользователя

Страница: 14 / 32

12
PACK Programming:
Temperature Settings:
• Press the button on the left (Pack) side of the keypad and
then use the buttons to set the desired temperature.
• The LED light to the right of the button will illuminate indicating
the temperature setting has been enabled.
ª Press either repeatedly to increase/decrease the temperature in
10°C increments.
ª Holding down one arrow button will result in rapid scrolling through
the temperature range (100°C minimum to 400°C maximum).
ª
Temperature setting is displayed on the numerical LED window.
NOTE: The Thermal Response Tip temperature is preset to 90°C and
is not adjustable.
Volume Settings:
• Press the button and then use the buttons to set the
desired audible tone volume.
• The LED light to the right of the button will illuminate indicating
the volume setting has been enabled.
ª Press either repeatedly to increase/decrease the volume level
in 20% increments.
ª
Holding down one arrow button will result in rapid scrolling through
the volume range (0% minimum to 100% maximum).
ª Volume setting is displayed on the numerical LED window.
NOTE: The numerical LED window automatically defaults to
displaying the selected temperature setting. If the Volume button is
pressed, the numerical LED Window will display the volume for 5
seconds and then revert to the selected temperature setting.