Main Directions For Use
22/48
B EN XS00 DFU WEB / Rev.08 / 01-2018 (Old ZF 190270.EN)
6.4
Preparatory Operations
CAUTION
• When attaching and detaching the file, turn the power off
beforehand.
• After the file is locked in place, lightly pull out the file to make sure
the file is locked.
• Always clean the shank of the file to be installed. Allowing dirt to
enter the chuck could cause loss of concentricity and deterioration
of chucking force.
(1)
Charge the batteries (see
6.1 Charge (if batteries are used)
) or
securely insert the plug of the AC adapter into a power supply.
(2)
Hold down the POWER key for more than one second to turn on the
power.
(3)
Press the PROGRAM key to select the program number suitable for
the file being used.
(4)
Select the rotational direction by pressing the REVERSE key. The
key changes over to the forward rotation (F) and reverse rotation (R)
each time it is pressed.
(5)
Select the auto reverse mode by pressing the AUTO REVERSE key.
The key changes over to
,
and
each time it is
pressed (see
6.5.1 Auto Reverse Function
).
AUTO REVERSING
AUTO STOP
AUTO REVERSE OFF
NOTICE
The PROGRAM key is fast-forwarded, when it is continuously held
down.
