Dentsply Sirona
Instructions for Use SiroCam UAF Plus
4 Operation
4.6 Operate the camera
66 90 643 D3762
D3762.201.01.03.02 04.2021
19
4.6
Operate the camera
4.6.1
Operating SiroCam UAF Plus
ü
Sidexis 4 Video Modules are installed.
ü
Sirona UAF Plus Module is installed.
ü
Sidexis 4 (version 4.2 or above) is installed.
1.
Start Sidexis 4.
Ä
During Sidexis 4 startup the camera LEDs will blink three times
to indicate a valid installation of the video module and to
confirm that the camera is ready for normal operation.
2.
Click on the
“Patient” button in the phase bar and select a patient. If
you do not select a patient, you will be prompted to select one
before images are imported and saved in Sidexis 4.
3.
Click on the SiroCam UAF Plus image in the Status bar.
SiroCam UAF Plus highlighted
