Dentsply Sirona CEREC Primemill, Руководство по эксплуатации

Страница: 37 / 70

Dentsply Sirona
Operating Instructions CEREC Primemill 6 Operation
6.1 Configure
67 19 681 D3439
D3439.201.01.01.02 09.2019
37
6 Operation
CAUTION
Risk of injury on calibration pins/instruments
If you reach into the processing chamber (e.g.: when inserting/
removing a ceramic block, changing instruments, or inserting/
removing a calibration phantom), you may injure your hand on the
calibration pins/instruments.
Be careful not to brush against the calibration pins/instruments with
your hand.
Always insert your hand in the processing chamber underneath the
calibration pins/instruments.
In the event of cleaning or maintenance work in the processing
chamber, we recommend removing the instruments Bur 1.0 and/or
Bur 0.5 beforehand.
We also recommend that you select the "Cleaning Position" option on
the touch display to position the motors together so that the floor of
the production chamber is easier to access and to clean.
6.1 Configure
When you switch on the machine for the first time, you can make the
following settings in the initial setup:
● Language
● Region
● Date
● Time
● Temperature Unit
● Suction Unit
You can make the following settings via the touch display menu item
"Settings" (symbol on left-hand side):
● Language
● Region
● Date and Time
● Temperature Unit
● IP Settings
● Firmware Version
● Suction Unit
● Calibration
● Camera
● Service