DentistRx InteliSonic
9
Using The Toothbrush
1. Attach a brush head to the
toothbrush handle.
2. There will be a small space
between the brush head and
brush handle. This allows for
the vibration of the brush head
when in use.
3. Using the mode selection
button, select which mode you
prefer for your brushing session.
Normal: Completely cleans your teeth
and gums.
Sensitive: Gently cleans your tongue and any
other sensitive areas.
Massage: Pulsates for gentle gum
stimulation.
Note: If you alter the mode during the brush cycle,
the 2 minute brush cycle will reset.
4. Wet the toothbrush bristles and place a small
amount of toothpaste on the brush.
5. Place the bristles against the teeth at a
45-degree angle towards the gum line to ensure
the bristles are in close
contact with the space
between teeth and gums.
6. Press the power button to
turn on the toothbrush.
7. Apply light pressure
and gently move the brush head slowly across
the teeth in a small back and forth motion.
Continue this motion throughout the brushing cycle.
Brushing Time
1. In order to maximize cleaning effectiveness,
divide your mouth into 4 sections. Start with
Section 1 and brush each
section for 30 seconds. The
brushing action will pause
between each 30 second
interval, indicating when
to move on to the next
section. The toothbrush will
automatically stop after 2
minutes of use.
Note: If you change the cleaning mode during the
brushing cycle, the 2 minute brushing timer will
reset and start over.
3
4
2
1
