Dentech AYRDYNE 4.0, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 50

www.ayrdyne.com
SAFETY
SAFETY
OVERVIEW
3
The installation, maintenance, operation, and
care of the AyrDyne
®
Monitoring System Human
Machine Interface (HMI) should only be performed
by individuals who are qualified and trained
to do so. A “qualified” person in this context is a
person who has skills and knowledge related to the
construction and operation of electrical equipment
and its installation through both work experience
and training. Additionally, a qualified person is one
who has received and undergone safety training
specific to electrical maintenance. Anyone who has
not undergone safety training specific to this system
should not operate or perform maintenance on the
system.
In terms of maintenance of this system, “lock out tag
out” safety protocol applies. This means that any
time maintenance on this system is performed, the
machine must be shut down, unplugged, and tagged
or labeled, explaining that maintenance is taking
place.
DenTech is not liable for any
consequences arising from misuse of
this system.
If you are unsure of whether you
are qualified to use or maintain this system, please
contact an electrician or other qualified professional
for assistance. Failure to follow safety protocol for
this and any other system could result in serious
bodily harm or other injury. No responsibility is
assumed by DenTech for any consequences arising
out of the use of this material.
1.2
This symbol indicates that an electrical hazard
exists which could result in personal injury if
the instructions are not followed.
This safety alert symbol is used to alert you
to potential personal injury hazards. Obey all
safety messages that follow this symbol to
avoid possible injury or death.