Dentech AYRDYNE 4.0, Инструкция по установке, эксплуатации и обслуживанию

Страница: 39 / 50

www.ayrdyne.com
SAFETY
37
SAFETY CIRCUIT
Status
This text display shows the
status of the safety relay.
Output Relays
Safety relay condition
OK
Safety Relay is set
TRIPPED
Safety Relay is tripped
Safety Circuit
OK
All devices in safety
circuit are set
OPEN
At least one device in the
safety circuit is not set
Fire Suppression
i. OK
All devices in safety circuit
are
set
ii. OPEN
At least one device in the
safety circuit is not set
Burst Indicator
i. OK
All devices in safety circuit
are
set
ii. OPEN
At least one device in the
safety circuit is not set
ISOLATION VALVE
Status
This text display shows the
status of the isolation valve.
Excessive Material Accumulation
Detected
YES or NO
Event Detected
YES or NO
Flap Position
Closed, Open, Faulted
START TIME (m)
This numeric entry/display shows the time
allowed for the flap to open after starting the
collector. If the flap has not opened in the
allotted time, a fault will be initiated, and the
collector will shut down.
STOP TIME (m)
This numeric entry/display shows the time
allowed for the flap to close after stopping
the collector. If the flap has not closed in the
allotted time, a fault will be initiated.
FORCE SOLENOID
This button will force solenoid to lock for one
minute.
Note: The following settings are available only
when a Proflap isolation valve is installed.
1 2
3
4
5
3.5
OPERATION
a a
b
c
d
b
c
d
e
i.
i.
ii.
ii.