background image

2.3 THE PACKAGING CONTAINS 

• 1 complete water softener IV 
• 1 instruction manual  
• 1 drain pipe 
• 2 joints for connection to the water sullpy network 
 

2.4 TECHNICAL FEATURES 

Pressure of feed water:  

0,1 ÷ 0,8 MPa (1 ÷ 8 bar) 

Nominal flow rate at 4 bar:  

800 l/h 

Room temperature:  

4°C - 35°C 

Joints for the connection to the water 
network:  

- inlet 3/4 "G (for normal washing machine or model trimmer hose 
- outlet for D. = 8x6 hose) 

 

2.5 FEATURES OF FEED WATER 

Feed water must be: 
• Drinkable and clean 
• Temperature must be between 6° and 25°C 
• Hardness must be below 900 ppm CaCO3 (90°f)  
 

2.6 EQUIPMENT PERFORMANCE BASED ON WATER HARDNESS 

 

 
 

3. INSTALLATION 

3.1 PACKAGING 

• Before the installation, check that the equipment was not damaged by the transport and does not show any 
anomaly. In case of doubt, ask your seller. 
• Don’t throw the package away for some time, being careful to keep any dangerous or small parts of the package 
away from children. 
 

3.2 CHOOSING THE PLACE OF INSTALLATION 

• Ensure that any other water treatment machine is not present upline of the place of installation. 
• Ensure that feed water comes from a drinking water pipe. We recommend to check the chemical and physical 
parameters of the drinking water as well as its hardness before installation. 
• Install the equipment near a floor sink to dispose of the waste water produced by the regeneration.  
• Install the equipment in a dry place easily accessible to maintain, regenerate and clean the equipment.  
Do not install the equipment in dirty and unhygienic places or in any place difficult to clean.  
• Ensure that room temperature in the place of installation is between 4°C and 35°C. 
• Keep away from corrosive or acid products. 
• Do not install in places where electric or personal safety regulations are openly disregarded. 
• Hydric pressure must not be under 0.1 Mpa (1 bar) or over 0.8 Mpa (8 bar). (We recommend at least 3 or 4 bar) 
• If water pressure is over 8 bar, it will be necessary to install a pressure regulator. 
• Salt packages or boxes must not be kept in humid places or in direct contact with the floor: keep it, for example, 
on a wooden pallet.  

Содержание H8















Отзывы: