DentalEZ NuSimplicity Скачать руководство пользователя

Страница: 10 / 41

www.DentalEZ.com

866-DTE-INFO

DentalEZ

Equipment

PN: 2717-256E

Section I Introduction

Safety Precautions

• Before attempting to move the chair, it

must be lowered to its lowest position and

locked in place at zero degrees rotation. It

is strongly recommended that accessories,

such as lights and units, be removed before

moving.

• Rating of main circuit breakers should be

20 Amps maximum.

• To satisfy FCC RF exposure requirements

for mobile and base station transmission

devices, a separation distance of 20 cm or

more should be maintained between the

antenna of this device and persons during

the operation. To ensure compliance,

operation at closer that this distance is not

recommended. The antenna(s) used for

this transmitter must not be co-located

or operating in conjunction with any other

antenna or transmitter.

CAUTION

• Wiring schematics are provided with this

manual.

• Isolating the unit from the supply mains is

accomplished by unplugging the unit from

the power receptacle.

NOTICE

Before proceeding with electrical

installation, all wiring must be in

accordance with NEC and local electrical

codes.

To avoid the risk of electrical shock, this

equipment must only be connected to a

supply mains with protective earth.

• Do not modify the NuSimplicity Chair

without permission from DentalEZ.

• The use of ACCESSORY equipment not

complying with the equivalent safety

requirements of this equipment may lead

to a reduced level of safety of the resulting

system. Consideration relating to the

choice shall include:

• Use of the accessory in the PATIENT

VICINITY

• Evidence that the safety certi

cation

of the ACCESSORY has been

performed in accordance to the

appropriate IEC 60601-1 harmonized

standard.

• The plug cannot be located in a position

that requires tools to access.

• To prevent injury from falling or crush

hazards, patients should be seated upright

in the chair facing forward. Their head

should be on the headrest with their feet

at the toe of the chair. Their arms should

be on the armrests or folded across their

midsection.

• Headrest options that contain magnets can

interfere with the function of some medical

devices, including pacemakers.

WARNING

Содержание NuSimplicity










































Результаты поиска

Содержание NuSimplicity

Отзывы:

Похожие инструкции для NuSimplicity

Бренды по названию

Популярные бренды

DentalEZ NuSimplicity, Руководство пользователя

Результаты поиска

Содержание NuSimplicity

Отзывы:

Похожие инструкции для NuSimplicity

Бренды по названию

Популярные бренды