Software
Management
Setting the Segment
Checking the
Segment
button restricts a terminal group to a range of IP addresses. The
IP Address can be any valid address on the segment as it is used only to identify the
segment. The setting of the Net Mask can be used to restrict the range. This feature is
useful for segregating terminal groups by location.
Setting Force Reload
Clicking on the
Force Reload
button forces all terminals within a group to be
automatically updated. The following warning message appears.
Click on the
Yes
button to force the reload.
Setting the Default Terminal Group
New terminals that have not yet been assigned to any group are initially assigned to the
default group in effect when they are cold-booted.
Any group can be made the default group by clicking on the group, and then clicking on
the right mouse button. Then click on the
Make Default
option.
Reassigning Terminals
After a terminal has been configured and assigned to the default group, it can be
reassigned to a new group by clicking on the terminal icon as shown below.
Supported Equipment Manual
•
May, 2006
2-29
