6.
T
EST AND REFIT
Before you refit the head unit, test the Gateway
Lite BT with your car audio, making sure all
connections are correct and that you have full
functionality.
Note: If during testing you notice any
changes or inconsistencies in the way the
car's electrical system operates, disconnect
the Gateway product immediately and consult
your dealer.
When you have tested everything, refit your head
unit. Take care
not to trap any wires
or
the
Dension product
. We supply cable ties to mount
the Gateway Lite BT module.
Please mount the
module away from heat or damp surfaces.
Refit of the Head Unit is the reversal of the
removal process for your specific vehicle, as per
your manufacturer's instructions.
7.
C
AR
-
SPECIFIC CONNECTIONS
Cars with mini ISO connector
BMWs with 17-pin connector
Cars with Quadlock connector (not break-in)
If the CDC connector has a separate housing
7.
D
ISCLAIMER
All photos / illustrations are for representation
purposes only and may differ visually from the
equipment in your vehicle. Information correct at
time of going to print E. & O. E. Dension Audio
Sytems Ltd. and it’s registered partners cannot
be held liable for any damages caused by the
incorrect installation of any Dension product.
8.
F
URTHER ASSISTANCE
If you need further assistance in using your
Dension product, please contact your local
supplier or visit
www.dension.com/en/support
and click on ‘Support’.
Please check also
the download section
for the
latest firmware version and product
documentation, as these may provide additional
features or easier use of the product.
