Mute or Pause
on the radio disconnects the Bluetooth connection without terminating the actual
phone conversation. You can continue the call by using the handset.
Canceling Mute
or Play will restore the Bluetooth connection and the hands free mode.
Note
: Certain phones are not able to reconnect Bluetooth connection during a call, only just after.
About PND
To listen music from the PND’s media player, select Source Select (Disc6/Track8) and control playback
on the PND. You can use also radio or steering wheel buttons for basic media control playbac The
navigation prompts fade in and out automatically if a Gateway source is playing.
The
navigation prompts
fade in and out automatically if a Gateway source is playing.
If you are listening to a radio station, then depending on the car radio type, one of the following
options will happen:
•
Announcement in the two front speakers
•
Announcement in PND speaker while radio mutes
About Original CD Changer
The Installation Guide gives indication, weather your car can keep the original CD changer or not.
Some cars support multiple instances of CD changers. Simply select the proper Disc as desired.
Select Disc5 to return to the latest Gateway sources or Disc6 to select a new Gateway source.
Other cars can handle one CD changer only.
When you want to change between the CD Changer and the Gateway 500 set the mode selector
switch (See page #1) to the wished position.
For the change become effective the car’s infotaintment system must shut down: turn off the
ignittion and wait 1-5 minutes depending your car’s characteristic.
Operation in Non-Text capable cars
Unfortunately not all the cars feature with text capable radios and sometimes the built in CD-text
capability is not accessible for the external CD changer – where the Gateway is connected.
To learn more about text capabilities of your vehicle, please consult the Installation Guide or visite
the Knowledge Base at http://support.dension.com/enabletext.
If your car do not support text, than instead of a Menu, you can select a source by seting a Track# on
Disc6. When you select Disc6, the Track# will indicate the currently active source. This may take a few
seconds. Chnage the Track# and press FF to select a new source device.
This table indicates the Track# assignment to the possible sources:
9
DISC6
AUX
iPod
User
Interface
iPod
Gateway
Interface
USB
Bluetooth
Audio
Bluetooth
Hands Free
Reserved
PND
Track #
1
2
3
4
5
6
7
8
