Dension Gateway Pro BT, Инструкция по установке и эксплуатации

Страница: 7 / 9

12 13
Mode selection Previous menu
Menu
selection
Up
Down
In the menu, you will see the following menu items:
►
Phonebook: You can select a phone number from your address book
to initiate a call. Contacts are shown in alphabetical groups, followed
by all contacts in alphabetical order.
► Received / Missed / Dialled calls: Provides access to the respective
call logs.
► Disconnect: Disconnects the paired phone.
Please note: For consistency reasons the Gateway Pro BT does not store
the phone numbers, therefore your phone resynchronizes all the time
when it connects to the Gateway. Synchronization is possible up to 1000
phone numbers (entries with multiple phone numbers synchronize as
multiple entries).
Receiving and making phone calls
When receiving an incoming call, the caller number (if provided) or the
corresponding contact name in your phonebook is displayed. You can
answer the call by pressing the ‘OK’ button on the radio.
In this moment the music or radio gets muted and the audio of the call
is directed to the speakers.
Paired phone
Previously paired phone names (ID) will be listed here, but only the last
four. You can perform pairing from this menu too by selecting the phone
from the list.
Hotkeys
You can assign the CD selector buttons (between 2-5) to the desired folder
e.g. album, song or menu position. To do so, please follow the below steps:
► Select the ‘Set CD’ option in the ‘Hotkey’ menu.
► Navigate to the desired menu or music item you want to set as hotkey.
► Press and hold for 3 seconds any of the buttons from CD2-CD5 you want
to assign as hotkey. You will see the ‘Stored’ message on your display.
Bluetooth audio
In case you want to play music via A2DP from your mobile phone, turn the
Bluetooth audio option on.
Please note: After changing the setting options you need to turn the
Gateway off completely in order to load the system with the new settings.
There are two main screens that can be shown on the central display
(cluster): the audio and the phone screens. Selecting these screens is
possible with the ‘Menu’ button on the steering wheel (if available).
The music playback and settings are controlled from the steering wheel
or stalk control, but it is also possible to select the next or the previous
track from radio. The phone menu can be controlled also from the
steering wheel or stalk control
11. USING THE PHONE MENU
First go to the default screen, then find the phone function on the display
by pressing the ‘MODE’ button, then press the ‘OK’ button on the radio
twice to get into the phone menu. Toggling between different options is
possible with the up (
p
) and down (
q
) navigation buttons. To enter the
menu option, press ‘OK’. In order to get back, press ‘ESC’.