© by DENQBAR GmbH
http://www.denqbar.com
51
NOTICE
If the engine cannot be restarted after it has been turned off, please check the oil level first.
Attention!
Modifications to the carburetor for the operation in high altitudes can cause overheating and
massive damages to the device.
8. Areas of use
Warning!
In order to avoid electric shock, the generator should only be operated with a strong, grounded
cable.
Attention!
Avoid exceeding the rated power during constant operation of the generator. Otherwise please
consider the total consumption of the connected devices.
Do NOT operate the generator above the rated power. In this case, the seller, as well as the
manufacturer gives no warranty.
Do NOT connect the generator to the house power circuit, as this may destroy the generator
or electric devices in the house.
Use the generator ONLY for its designated purpose.
Do Not connect generators in parallel.
Only use authorised and marked cables for line extension (H07RN...)
Maximum line length incl. extension: 50 m for cable with 1.5 mm² diameter, 100 m for cable
with 2.5 mm² diameter.
Keep the generator away from other electric lines, for example manifold.
NOTICE!
You may use direct current and alternating current at the same time. Pay attention that the
power consumption does not exceed the admissible total power of the generator.
The power consumption of the connected consumers upon start-up may not exceed the rated
power of the generator. In this case, the seller as well as the manufacturer gives no warranty.
Use of alternating current (AC)
1. Turn on the device and check that the operating display lights up.
2. Ensure that the desired consumer is turned off and only then insert the power plug of the
consumer into the power socket.
Use of continuous current (DC)
1. Turn on the device and check that the operating display lights up.
2. Ensure that the desired consumer is turned off and only then connect the cable of the
consumer with the DC-socket.
Operating display
AC-power outlet
