16
Operation
RT (Radio Text)
1
Press the
MENU
button to select menu.
3
Press the
TUNING/PRESET
knob or
ENTER
button to set the RDS search selection mode.
2
Either turn the
TUNING/PRESET
knob or
press the
CHANNEL/CONTROL
button to
display “RDS”.
4
Either turn the
TUNING/PRESET
knob or
press the
CHANNEL/CONTROL
button to
display “RT ON/OFF”.
5
Press the
TUNING/PRESET
knob or
ENTER
button to set the RT ON/OFF selection mode.
6
Either turn the
TUNING/PRESET
knob, press
the
CHANNEL/CONTROL
button to choose the
“RT ON” or “RT OFF”.
7
Press the
TUNING/PRESET
knob or
ENTER
button to set whether to enable or stop the
RADIO TEXT function.
If no text data is being broadcast, “NO TEXT DATA” is
displayed.
TUNING/PRESET
MENU DISPLAY
MENU
CHANNEL/
CONTROL
ENTER
DISPLAY
Switching RDS information display
1
Use the procedure described at “Auto tuning”,
“Manual tuning” or “Recalling preset stations”
to tune in a frequency with an RDS station.
2
Press the
DISPLAY
button to switch the RDS
reception information.
The display switches as shown below each time the
DISPLAY
button is pressed.
q
STATION NAME
:
Only displayed when the search mode is set to
PRESET and the station name has been registered.
e
PTY
:
The programme type of the tuned in broadcast is
displayed.
r
CT
:
The current time is displayed.
w
PS
:
The programme service name and frequency of the
station tuned in is displayed.
The above is an example for when there is TP
data but no RT data.
• When the “STATION NAME” is not registered,
q
is not
displayed.
Downloaded from
www.Manualslib.com
manuals search engine
