2
ENGLISH
When connecting the speakers to an amplifier, be sure to read the
amplifier’s owner’s manual carefully and connect properly.
• Connect the input terminals on the rear panel of the speaker with
the speaker output terminals on the amplifier, using the included
speaker cables.
• Connect the speaker for the left channel to the “L” terminal on the
amplifier, the speaker for the right channel to the “R” terminal on
the amplifier, making sure to check the polarities (“+” and “–”).
Amplifiers have various speaker output terminals.
Check the owner’s manual of the amplifier you are using for details.
NOTE
• Be sure to turn the amplifier’s power off before connecting the
speakers to the amplifier.
• If the polarities are inverted, the phase may be off and the sound
may have no bass component, making it seem unnatural. Be sure
to connect the polarities properly.
Connections
Connecting the speaker cables
Connect to amplifier’s
“+”side: Plain core
Connect to amplifier’s
“–” side: Striped core
“–” side
terminal: Black
“+” side terminal: Red
1
Peel off the sheath from the tip of the
speaker cable, then firmly twist the
wires by hand so that they do not stick
out and cause short-circuits.
2
Loosen the terminal by turning to the left and insert
the speaker cable through the hole in the speaker
terminal.
3
Tighten the terminal by turning to the right and
check that the core wire is not protruding from the
hole.
Once connections are completed, pull gently on the speaker cables
to check that they are securely connected.
NOTE
Do not let the core wires of two speaker cables touch each other.
Doing so will short-circuit the amplifier circuitry and damage the
amplifier.
Type:
2-way · 2-speakers
Low-leakage-flux, Reflex box
Frequency range:
45 Hz – 40 kHz
Input impedance:
6 Ω/ohms
Max. input:
60 W (IEC), 120 W (PEAK)
Sensitivity:
86 dB (1 W · 1 m)
Crossover frequency:
3 kHz
Speakers:
12 cm (4-3/4”) cone bass-mid x 1
2.5 cm (1”) soft dome high range x 1
Maximum external
dimensions:
145 (W) x 233 (H) x 234 (D) mm
(5-45/64” x 9-11/64” x 9-7/32”)
Weight:
3.9 kg (8 lbs 9.6 oz)
* For improvement purpose, specifications and design are subject to
change without notice.
Specifications