1
ENGLISH
Acoustic Sponge
When installing on a desktop
or in the corner of your room,
the bass may emphasized.
Insert sound foam plug in the
bass-reflex duct at the back of
the SC-X1000.
You can adjust the bass sound
with the amount of sound
foam plug you insert.
CAUTION
• Do not insert the foam plug too deep. The foam plug could fall in
and get stuck inside.
• If the foam plug cannot be removed or falls inside, stop using the
unit immediately and consult your store of purchase or your nearest
repair and inquiry center.
Cleaning
• Use a dry wiping cloth and wipe lightly to remove dirt from the cabinet
and operation panel.
• When using chemically treated cloths, follow the precautions provided
for them.
• Do not use benzene, thinners, or other organic solvents or insecticides
on the speakers since they may cause a change in quality or color.
Other cautions
• Raising the amplifier’s volume excessively and playing with distorted
sound could damage the amplifier and speakers. Enjoy the sound at
a reasonable volume level.
• When moving the speakers, note that applying strong force to the
surface of the speaker through the speaker net could damage the
speaker.
Removing the Speaker Net
• The net on the front of the speakers can be removed.
• To remove, grasp both sides of the net and pull forward.
• To mount, line up the projecting pieces in the four corners of the
speaker net with the holes in the four corners of the cabinet and
press in.
Foam plug
Before using
Cautions on installation
The quality of the sound produced from the speaker is affected by the
size and type of the room, as well as by the method of installation.
Consider the points listed below before installing the speaker.
• If the bass sound is overemphasized when the speakers are
installed directly on the floor, set them on concrete blocks or other
hard stands.
• Note that placing the speaker on the same stand or shelf as a
turntable may result in howling.
• Also note that if there is a magnet or any device generating magnetic
force nearby, interaction between this device and the speakers can
cause the colors on the TV to become blotchy.
WARNING
• Be sure to fasten the speaker cables to a wall, etc., to prevent
people from tripping over them or otherwise pulling on them
accidentally, causing the speakers to fall.
• Be sure to check for safety after installing the speakers.
Afterwards, perform safety inspections at regular intervals to be
sure there is no danger that the speakers will fall.
DENON will not be liable for damages or accidents caused by
inappropriate choice of the place of installation or improper
installation procedures.
Installation
Stick the included anti-slip pads on the four corners of the bottom
surface.
[Bottom]
Anti-slip pads
Getting started
Thank you for purchasing this DENON product. To ensure proper
operation, please read this owner’s manual carefully before using the
product.
After reading them, be sure to keep them for future reference.
Accessories
Check that the following parts are supplied with the product.
q
Owner’s Manual ...................................................................... 1
w
Service station list ................................................................... 1
e
Speaker cable (Approx. 9.8 ft / 3 m) ....................................... 2
r
Foam plug ............................................................................... 2
t
Anti-slip pads (8 pcs. / 1 sheet) ............................................... 1
t
r
e
About this manual
n
Symbols
v
This symbol indicates a reference page on which
related information is described.
This symbol indicates a supplementary information
and tips for operations.
NOTE
This symbol indicates points to remember
operations or function limitations.
n
Illustrations
Note that the illustrations in these instructions may differ from the
actual unit for explanation purposes.