Connections and Settings
Operations
Troubleshooting
ENGLISH
For buttons not explained here, see the page indicated in parentheses ( ).
q w
r
t
u
u
i o
Q0
Q1
Q3
Q2
Q4
y
e
Part Names and Functions
Front Panel
q
Power operation button (ON/STANDBY)
···························· (13)
w
Power indicator
······································································ (13)
e
Power switch (
h
ON
j
OFF)
················································· (13)
r
Left channel meter select button (METER)
·························· (13)
t
Left channel meter indicators (L1 / L2 / L3 / L4)
················· (13)
y
Left channel level meter
························································ (13)
u
Center channel meter indicators (L5 / R5)
··························· (13)
i
PRE AMP CONTROL LINK indicator
········································ (6)
o
Center channel meter select button (METER)
····················· (13)
Q0
Center channel level meter
··················································· (13)
Q1
Right channel meter select button (METER)
······················· (13)
Q2
Right channel meter indicators (R1 / R2 / R3 / R4)
············· (13)
Q3
Right channel level meter
······················································ (13)
Q4
METER ON/OFF button
························································· (13)
Getting Started
NOTE
When outputting a program source that has data such as SACD, which
is higher than the audible band, the indicator moves differently than
the volume you hear.
n
About channel level meter
You can select the output level (dB indicator) of each power amp
channel to check the meter.
If a sine wave is input, the output power for the meter indicator is
as shown in the following table.
• When NORMAL connection or Bi-AMP connection is used
Output
indicator
4 Ω/ohms load
6 Ω/ohms load
8 Ω/ohms load
0 (dB)
300 (W)
200 (W)
150 (W)
–10 (dB)
30 (W)
20 (W)
15 (W)
–20 (dB)
3 (W)
2 (W)
1.5 (W)
–30 (dB)
300 (mW)
200 (mW)
150 (mW)
–40 (dB)
30 (mW)
20 (mW)
15 (mW)
–50 (dB)
3 (mW)
2 (mW)
1.5 (mW)
• When BRIDGE connection is used
Output
indicator
4 Ω/ohms load
6 Ω/ohms load
8 Ω/ohms load
0 (dB)
1200 (W)
b
800 (W)
b
600 (W)
b
–10 (dB)
120 (W)
80 (W)
60 (W)
–20 (dB)
12 (W)
8 (W)
6 (W)
–30 (dB)
1200 (mW)
800 (mW)
600 (mW)
–40 (dB)
120 (mW)
80 (mW)
60 (mW)
–50 (dB)
12 (mW)
8 (mW)
6 (mW)
b
Possible output by POA-A1HD is up to the rated output.
1.POA-A1HDE2_ENG.indd 7
2008/01/18 11:34:25
