General
Auto-Standby
Sets the amount of time that must elapse without unit operation or an input
signal before the unit goes into standby automatically.
Off
(Default):
The unit does not go into standby
automatically.
1min:
The unit goes into standby after 1 minutes.
5min:
The unit goes into standby after 5 minutes.
15min:
The unit goes into standby after 15 minutes.
30min:
The unit goes into standby after 30 minutes.
60min:
The unit goes into standby after 60 minutes.
90min:
The unit goes into standby after 90 minutes.
Reset
Perform this procedure if the display is abnormal or if operations cannot be
performed. Restores the contents of each setting to the factory settings.
Make settings again.
Cancel:
Unit is not initialized.
OK:
Unit is initialized.
66