26
DVM-1845/745
FLOW CHART NO.23
Rotary tray does not function.
Is the normal control voltage inputted to pins
(40, 41) of IC3001? For each terminal voltage,
refer to FLOW CHART No.13 <The key operation
is not functioning.>
Is the voltage of 3.3V supplied to pin(1) of IC3001?
Is the normal control voltage outputted to pins(2,4)
of IC3003?
Check the switches (SW2208, 2209, 2211 - 2214)
and their periphery, and service it if defective.
Replace IC3001.
Replace Rotary Motor.
Check EV+10V line and
service it if detective.
Check CHG 3.3V line and service it if detective.
Is the normal control voltage outputted to pins
(22, 23) of IC3001?
Is the voltage of 10V supplied to pin(6) of IC3003?
Replace IC3003.
Yes
Yes
Yes
Yes
No
Yes
No
No
No
No
Содержание DVM-1845/745
