14
After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC
cord to the AC outlet.
• If you connect to 5.1-channel surround system, do not connect to SBR/SBL (surround back R/L)
jacks, then set “Surround Back” in “Speaker Configuration” to “None”.
Connecting the AC cord
Supplied cables used in this connection are as follows:
• AC cord x 1
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
AC IN
RS-232C
STRAIGHT CABLE
ROOM TO ROOM
REMOTE CONTROL
COMPONENT VIDEO OUT
S VIDEO OUT
Y
PB/CB
PR/CR
T
HDMI OUT
OUT
IN
AC outlet
AC cord
AC 230V, 50 Hz
E5J00_02_04ED_V2_EN.book Page 14 Thursday, October 16, 2008 12:00 PM