
14
Playing an iOS device
With this unit, you can listen to music on an iOS device. It is also
possible to operate the iOS device from the main unit or remote
control.
For information on the iOS device models that can be played back with
this unit, see “Connecting an iOS device” (
Load the iOS device onto the Dock of this unit
(
When the iOS device is loaded to the dock tray on this unit, the input
source automatically switches to “iDevice”.
•
During AirPlay, the input source does not switch automatically.
Press to switch the input source to “iDevice”.
NOTE
This function is activated around 30 seconds after the power is turned
on.
n
Streaming music stored in iPhone, iPod touch or
n
Playing iTunes music with this unit
n
Disconnecting the iOS device
1
Press
X
to set the standby mode.
2
Remove the iOS device from the
Dock of this unit.
NOTE
•
Depending on the type of iOS device and the software version,
some functions may not operate.
•
Note that DENON will accept no responsibility whatsoever for any
problems arising with the data on an iOS device when using this unit
in conjunction with the iOS device.
n
Remote control and iOS device button relations
Remote control
buttons
iOS device
buttons
Operation on this unit
13
13
Play the track / Pause the track.
8
,
9
(Press and release)
8
,
9
(Press and
release)
Play the track from the beginning/
Play the next track.
8
,
9
(Press and hold)
8
,
9
(Press and hold)
Fast-reverse the track/
Fast-forward the track.
Adjusting the tone (LOUDNESS)
When you press LOUDNESS to the “On” (
h
) state, bass and treble
sounds, which are hard to hear at a low volume level, are enhanced for
a more natural audio quality.
Press
LOUDNESS
on the main unit.
AC IN
USB
NETWORK
WIRELESS LAN
LOUDNESS
ON / STANDBY
AUX IN
NETLINK
WPS
5V 0.5A
•
Press the button again to the “Off” (
j
) state to return to the
original audio quality.
Operations possible during playback
Various memory functions
Last function memory
This function stores the settings which were made before going into
the standby mode.
When the power is turned back on, the settings are restored.
Pr
epar
ations
Oper
ations
Inf
or
mations
Oper
ations