Denon DP-DJ151 Скачать руководство пользователя страница 3

2

CAUTION

:

1. Handle the power supply cord carefully

Do not damage or deform the power supply cord. If it is damaged

or deformed, it may cause electric shock or malfunction when

used.  When removing from wall outlet, be sure to remove by

holding the plug attachment and not by pulling the cord.

2. Do not open the bottom cover

In order to prevent electric shock, do not open the bottom cover.

If problems occur, contact your DENON dealer.

3. Do not place anything inside

Do not place metal objects or spill liquid inside the turntable

system.

Electric shock or malfunction may result.

Please, record and retain the Model name and serial number of your

set shown on the rating label.

Model No. DP-DJ151

Serial No.

NOTE:

This unit may cause interference to radio and television reception if
you do not operate it in strict accordance with this OPERATING
INSTRUCTIONS.

This unit complies with Class B computing device rules in
accordance with the specifications in Sub-part J or Part 15 of the
FCC Rules, which are designed to provide reasonable protection
against such interference in a residential installation. If the unit
does cause interference to any radio or television reception, try to
reduce it by one or more of the following means:
a) Turn the other unit to improve reception
b) Move this unit
c) Move this unit away from others
d) Plug this unit respectively into a different AC outlet

✽ 

This is note in accordance with Section 15.838 of the FCC Rules.

FOR U.S.A. & CANADA MODEL ONLY

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

POUR LES MODELES AMERICAINS ET 
CANADIENS UNIQUEMENT

ATTENTION

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTERODUIRE LA

LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE

CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’ AU

FOND.

IMPORTANT TO SAFETY

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.

CAUTION

This equipment has a voltage selector switch.

Check the voltage selector switch is set to an appropriate voltage

in your area before use.

ex. U.S.A. & CANADA : 115 V

EUROPE

: 230 V

230

115

230V

115V

Содержание DP-DJ151











Отзывы: