3
3
DN-X1500
DISASSEMBLY
(Follow the procedure below in reverse order when reassembling.)
1. Top Panel Unit
(1)Remove 9 screws and pull up Top Panel Unit.
(2)Disconnect FFC cable and Connector.
(3)Detach Top Panel Unit.
Note:
●
Do not pull out aslsnt to prevent FFC cable damage.
●
Do not fail to pull AC cord from wall outlet before
disconnect the FFC cable.
if AC cord is remained plugged into wall outlet,
power is kept supplied in the unit, which may cause
danger.
2. Cross Feder Unit
(1)Remove 2 screws and pull up Cross Feder Unit.
(2)Disconnect Connector.
Top Panel Unit
Cross Feder Unit
Connector
Label face
Содержание DN-X1500
