background image

11

ENGLISH

4 COMPACT DISCS

1. Precautions on handling compact discs

• Always wash your hands before before you get started!

• Do not allow fingerprints, oil or dust to get on the surface of the

CD disc.

If the disc is dirty, wipe it off gently with a soft dry cloth.

• Do not use benzene, thinner, water, record spray, electrostatic-

proof chemicals, or silicone-treated cloths to clean discs.

• Always handle discs carefully to prevent damaging the surface;

in particular when removing a disc from its jewel case and

returning it.

• Do not bend the disc.

• Do not apply heat.

• Do not enlarge the hole in the center of the disc.

• Do not write on the label (printed side) with a hard-tipped

implement such as a pencil or ball point pen.

• Condensation will form if a disc is brought into a warm area

from a colder one, such as outdoors in winter. Do not attempt

to dry the disc with a hair dryer, etc.

2. Precautions on storage

• After playing a disc, always unload it from the player.

• Always store the disc in the jewel case to protect from dirt or

damage.

• Do not place discs in the following areas:

1) Areas exposed to direct sunlight for a considerable time.

2) Areas subject to accumulation of dust or high humidity.

3) Areas affected by heat from indoor heaters, etc.

Содержание DN-2100F





















Отзывы: