8
ENGLISH
(4) Connecting a video component equipped with S-Video jacks
•
When making connections, also refer to the operating instructions of the other components.
•
A note on the S input jacks
The input selectors for the S inputs and pin jack inputs work in conjunction with each other.
•
Precaution when using S-jacks
This unit’s S-jacks (input and output) and video pin jacks (input and output) have independent circuit structures, so that video
signals input from the S-jacks are only output from the S-jack outputs and video signals input from the pin jacks are only output
from the pin jack outputs.
When connecting this unit with equipment that is equipped with S-jacks, keep the above point in mind and make connections
according to the equipment’s instruction manuals.
Connecting a monitor TV
MONITOR OUT
• Connect the TV’s S video input (S-VIDEO
INPUT) to the
MONITOR OUT
jack using a S jack connection cord.
S-VIDEO
IN
V.AUX
OUT
IN
TV/DBS
DIGITAL(OPTICAL)
IN
OUT
IN
IN
TV/DBS
IN
V.AUX
VCR
MON.OUT
S VIDEO
IN
OUT
IN
IN
TV/DBS
IN
V.AUX
VCR
MON.OUT
VIDEO
R
L
IN
OUT
IN
IN
IN
OUT
V.AUX
TV/DBS
VCR
CDR/
TAPE
PRE OUT
SUB WOOFER
AM
FM COAX. 75
LOOP ANT.
AUDIO
S-VIDEO
IN
S-VIDEO
OUT
S-VIDEO
OUT
S-VIDEO
IN
S-VIDEO
OUT
B
B
Monitor TV
Connecting a TV/DBS tuner
• Connect the TV’s or DBS tuner’s S
video output jack (S-VIDEO
OUTPUT) to the
TV/DBS
IN jack using an S jack connection
cord.
S-VIDEO
TV or DBS tuner
Connecting a CS tuner
• Connect the CS tuner’s S video output
jack (S-VIDEO OUTPUT) to the
V.AUX. IN jack using an S
jack connection cord.
S-VIDEO
CS tuner
Video deck
Connect the components’ audio inputs
and outputs as described on page 7.
Connecting the video decks
• Connect the video deck’s S output jack (S-OUT) to the
VCR IN jack and the video deck’s S input jack (S-IN)
to the
VCR OUT jack using S jack connection cords.
S-VIDEO
S-VIDEO
•
Connect this unit video outputs to the TV either directly.
Do not connect it via a VCR (video cassette recorder).
Some discs contain copy prohibit signals. If such discs are
played via a VCR, the copy prohibit system may cause
disturbance in the picture.
•
Set the “TV TYPE” in “VIDEO SETUP” in “DVD SETUP”
to comply with your TV’s video format. When the TV is
PAL formated set to PAL.
NOTES:
(5) Connecting the antenna terminals
IN
V.AUX
OUT
IN
TV/DBS
DIGITAL(OPTICAL)
OUT
CR
IN
OUT
IN
IN
TV/DBS
IN
V.AUX
VCR
MON.OUT
VIDEO
R
L
IN
OUT
IN
IN
IN
OUT
V.AUX
TV/DBS
VCR
CDR/
TAPE
AM
FM COAX. 75
LOOP ANT.
AUDIO
AM LOOP
ANTENNA
(Supplied)
AM OUTDOOR
ANTENNA
GROUND
FM ANTENNA
ADAPTER
(Option)
FM INDOOR
ANTENNA
(Supplied)
DIRECTION OF
BROADCASTING
STATION
FM ANTENNA
75
Ω
/ohms
COAXIAL
CABLE
• An PAL-type FM antenna cable plug can be connected directly.
• If the FM antenna cable’s plug is not of the PAL-type, connect using the PAL-type antenna adapter (option).
1
4
2
3
AM loop antenna assembly
Connect to the AM
antenna terminals.
Bend in the reverse
direction.
Remove the vinyl tie
and take out the
connection line.
a. With the
antenna on top
any stable
surface.
Mount
b. With the
antenna
attached to a
wall.
Installation hole
Mount on wall, etc.
Connection of AM antennas
1. Push the lever. 2. Insert the conductor.
3. Return the lever.
Notes:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect
the AM loop antenna.
• Make sure AM loop antenna lead terminals do not touch
metal parts of the panel.
