16
DCD-510AE
6
Accumulated
laser on time
display
q
POWER switch is turned to on while pressing the
2
button on DCD-510AE.(Model name display)
w
Press the
8
button continuously for over 3
seconds to display the accumulated laser on
time. Accumulated laser on time is displayed for
5 seconds, the error display reappears.
・
The laser drive times are added and the result
is displayed.
・
One count corresponds to 10 minutes. (Values
under 10 minutes are discarded.)
・
Count values are stored in the EEPROM every
10 minutes.
・
The accunulated laser on time is displayed in
hours.
・
The count values are not cleared, even when
the set is reset.
・
Minimun display specification (possible even
with display times above those below)
No. digits store in EPROM: 4, 0xFFFF
No. digits displayed: 5
・
When the time exceeds 10922 hours, the stored
data is not updated and the value is fixed to
0xFFFF.
(The display is fixed to 10922 hours.)
6.1
Initialization of a
count value
・
When the
/
1 3
button is pressed for over 5 sec-
onds while the accumulated laser on time is
displayed, the count value is reset.
・
After resetting is completed, the display in
6(00000hours on the top line) reappears, and
after 5 seconds the model name display reap-
pears.
・
Initialization of a count value is performed upon
shipment from the factory and when the mech-
anism is replaced.
No
Key name
Function
Display
XXXXX hour
LASER ON TIME
CLEAR
LASER ON TIME
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
