Troubleshooting
If a problem should arise, first check the following.
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below.
Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
o
Power does not turn on / Power is turned off
Symptom
Cause / Solution
Page
Power does not turn on.
0
Check whether the power plug is correctly inserted into the power outlet.
0
This unit is in standby mode. Press
X
on the unit or POWER
X
on the remote control.
Power automatically turns
off.
0
The sleep timer is set. Turn on the power again.
0
The unit is set to Auto standby mode. The Auto standby mode automatically switches the unit to standby
if there is no signal and no operations are performed for more than 15 minutes. To disable Auto standby
mode, press and hold the POWER
X
button on the remote control for more than 3 seconds when the
Auto standby mode is enabled.
51
