Pairing with a Bluetooth device
In order to enjoy music from a Bluetooth device on this unit, the Bluetooth
device must first be paired with this unit.
Once the Bluetooth device has been paired, it does not need to be paired
again.
1
Press Bluetooth to switch the input source to
“Bluetooth”.
When using for the first time, the unit will go into the pairing mode
automatically and “Pairing Mode” will appear on the display of the
unit.
2
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
At the end of the pairing, the device name appears on the display of
this unit.
0
Connect to the Bluetooth device while “Pairing Mode” is being
displayed on the display of the unit.
Perform the connection with the Bluetooth device close to the unit
(about 1 m).
0
When connecting a second Bluetooth device, either press and hold Bluetooth on
the remote control unit or SOURCE on this unit for approximately 3 seconds, or
press SEARCH when the input source is set to “Bluetooth” in order to pair with the
Bluetooth device.
0
This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.
0
When a number appears on the display of this unit, check that it is the same
number as that shown on the screen of the Bluetooth device and then select “pair”
for both the Bluetooth device and the unit. (To select “pair” on this unit, press
ENTER on the unit.)
0
Enter “0000” when the password is requested on the screen of the Bluetooth
device.
Contents
Connections
Playback
Settings
Tips
Appendix
59
Front/Top
panel
Rear panel
Remote control unit
Index