o
Bluetooth cannot be played back
Symptom
Cause / Solution
Page
Bluetooth devices cannot
be connected to this unit.
0
The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the
Bluetooth device to enable the Bluetooth function.
-
0
Bring the Bluetooth device near to this unit.
-
0
The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
-
0
Turn the power of the Bluetooth device off and on again, and then try again.
-
0
Set “Network Control” to “On” and connect again.
91
NFC connection fails
0
Check the NFC settings on each Bluetooth device.
-
0
Cancel the Lock function on each Bluetooth device.
-
0
Check the NFC position on each Bluetooth device, and then move the NFC close to
Q
on this unit.
62
0
Set “Network Control” to “On” and connect again.
91
The sound is cut off.
0
Bring the Bluetooth device near to this unit.
-
0
Remove obstructions between the Bluetooth device and this unit.
-
0
To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN
devices and other Bluetooth devices.
-
0
Reconnect the Bluetooth device.
-
o
File names on the iPod/USB memory device are not displayed properly
Symptom
Cause / Solution
Page
The file names are not
displayed properly (“…”,
etc.).
0
Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that
cannot be displayed are replaced with a “.” (period).
-
Contents
Connections
Playback
Settings
Tips
Appendix
109
Front/Top
panel
Rear panel
Remote control unit
Index