z
1 This item can be selected when a Dolby TrueHD signal is played.
z
2 This item can be selected when Dolby TrueHD, Dolby Digital or DTS signal is played.
z
3 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z
4 This setting is available when the set sound mode name contains “+PL
g
z”.
z
5 During playback in Pure Direct mode, the surround parameters are the same as in Direct mode.
z
6 This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. (
v
p. 196)
z
7 This setting is unavailable when the set sound mode name contains “+PL
g
Music” or “+Neo:X Music”.
z
8 This setting is possible when the sound mode is “Cinema” mode.
z
9 This item cannot be set when “Dynamic EQ” is set to “On”. (
v
p. 160)
z
10 This item cannot be set when Audyssey
®
Setup (Speaker Calibration) has not been performed.
z
11 This item cannot be set when “MultEQ
®
XT” is set to “Off”. (
v
p. 159)
z
12 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
Contents
Connections
Playback
Settings
Tips
Appendix
251
Front panel
Display
Rear panel
Remote
Index