ZONE2 Setup
Configure the settings for audio playback on ZONE2.
Values set for “Volume Limit” and “Power On Volume” are displayed according to the
setting specified for the volume “Scale”
(
v
p. 158).
o
Bass
Adjust bass.
-10 dB – +10 dB
(Default : 0 dB)
o
Treble
Adjust treble.
-10 dB – +10 dB
(Default : 0 dB)
o
High Pass Filter
Make settings for cutting the low range to reduce distortion in the bass.
On:
The low range is attenuated.
Off
(Default)
:
The low range is not attenuated.
o
Lch Level
Adjust the left channel output level.
-12 dB – +12 dB
(Default : 0 dB)
o
Rch Level
Adjust the right channel output level.
-12 dB – +12 dB
(Default : 0 dB)
o
Channel
Set whether to playback in stereo or monaural.
Stereo
(Default)
:
Stereo playback.
Mono:
Monaural playback.
o
HDMI Audio
Selects the audio signal format for playing an HDMI source in ZONE2.
Through
(Default)
:
The HDMI audio signal is passed through this unit to the
device in ZONE2.
PCM:
The HDMI audio signal input into this unit is converted to a
PCM signal that can be output from the ZONE2 PRE OUT
terminals or speaker terminals.
Contents
Connections
Playback
Settings
Tips
Appendix
207
Front panel
Display
Rear panel
Remote
Index