Basic Operation
Basic Operation
ENGLISH
31
ENGLISH
Use
<INPUT SELECTOR>
to select “TUNER” or press
[TUNER]
.
Auto tuning
Manual tuning
Press
[MODE]
to set the auto tuning mode.
• The “AUTO” indicator lights.
Press
TUNING
.
• Automatic searching begins.
• If tuning does not stop at the desired station, use to the “Manual
tuning” operation.
• “AM” or “FM” can be selected directly by pressing
[FM/AM]
.
Use
<INPUT SELECTOR>
to select “TUNER” or press
[TUNER]
.
Press
[MODE]
to set the manual tuning mode.
Check that the display’s “AUTO” indicator turns off.
Press
BAND
to select “AM”, “FM” or “XM”.
When listening to the XM Satellite Radio (
page 32).
Press
BAND
to select “AM”, “FM” or “XM”.
When listening to the XM Satellite Radio (
page 32).
Press
TUNING
.
The frequency changes continuously when the button is held in.
1
2
3
4
1
2
3
4
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.
• “AM” or “FM” can be selected directly by pressing
[FM/AM]
.
Use the “Auto tuning” or “Manual tuning” operation
to tune in the station to be preset in the memory.
Press
[MEMORY]
.
Press
CHANNEL
to select the desired preset channel
(1 to 8).
Preset memory
Press
SHIFT
to select the desired memory block (A to
G).
Press
[MEMORY]
again.
• Store the station in the preset memory.
1
2
3
4
5
• To preset other channels, repeat steps 2 to 5.
A total of 56 broadcast stations can be preset — 8 stations (channels
1 to 8) in each of blocks A to G.
• The memory block can also be selected by pressing
SHIFT
.
Recalling preset stations
Press
SHIFT
to select the memory block.
Press
CHANNEL
to select the desired preset channel.
1
2
About the button names in this explanation
<
>
: Buttons on the main unit
[
]
: Buttons on the remote control unit
Button name only
:
Buttons on the main unit and remote control unit
SHIFT
[FM/AM]
CHANNEL
[XM RADIO]
STATUS
D
H
F
G
D
H
F
G
[TUNER]
[MODE]
BAND
TUNING
[MEMORY]
SHIFT
STATUS
BAND
TUNING
CHANNEL
<INPUT SELECTOR>
