z
: This is the fl ow for infrastructure type communications. For ad-hoc communications, set “Mode” at
the “Detail” settings to “Ad-hoc”.
Wireless LAN settings
Make settings for wireless LAN.
The mode automatically switches to “Wireless”.
If no Ethernet cable is connected
Turn on the AVR-4308CI’s power.
Display GUI menu “Manual Setup” – “Network Setup”.
To search for the network automatically
Access point settings
Search
Select the access point to
be set.
Without security
With security
For a encryption key and
WEP, also input the default
key.
Connection
(continued on right page)
If searching is not possible
To set manually
z
q
Input the SSID.
w
If there is security, select
the encryption method.
e
Input the encryption key.
r
If “WEP” was selected in
step
w
, select the default
key.
Normally select “1”.
“Detail” setting
If searching is possible, the
access points are displayed.
Make the SSID setting at
“Manual”.
To enter the IP address manually
Connection
Display GUI menu “Network Setup”
To acquire the IP address automatically
using the DHCP function
At the GUI menu “Manual Setup” – “Network
Setup” – “Detail” setting, set “DHCP” to “OFF”
and enter the IP address, subnet mask, default
gateway, primary DNS and secondary DNS.
This completes the setting.
This setting is required
when the network is
established via proxy
servers.
At the GUI menu “Manual Setup” – “Network
Setup” – “Proxy” setting, set “Proxy” to “ON”
and enter the address or domain name and
port numbers.
To connect via proxy server
To not pass through the proxy server
33
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
NOTE
Knowledge about networks is required to make the IP address and proxy settings. For details,
consult a network administrator.
2.AVR4308_P28~46.indd 6
2007/05/11 16:02:43
