7
GUI Menu Map
Pla
ybac
k
Inf
or
mation
Tr
oubleshooting
ENGLISH
Digital
Select digital input connector to assign to this source.
[Input source]
[Selectable items]
z
: When a DENON DVD player and the DENON LINK have been
connected, be sure to make a setting to “DENON LINK”.
NOTE
• This cannot be set for input sources for which “iPod dock” is
assigned.
• When an input source to which “DENON LINK” has been assigned
is selected in the MAIN ZONE, the PCM signal and network audio
signal (Internet radio, music server or USB) input from the digital
input connector cannot be output to the analog REC OUT connector
or multi-zone.
Input
source
CD
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
Default
setting
Coaxial
3
Coaxial
1
None
Coaxial
2
Optical
1
Optical
3
Optical
2
Optical
4
Coaxial1 ~ 3
Optical1 ~ 4
DENON LINK
z
None
CD
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
• With HDMI, the video and audio signals are transferred simultaneously.
To play the video signal assigned at “HDMI” combined with the
audio signal assigned at “Digital”, select “Digital” at GUI menu
“Source Select” – “Input Mode”.
• When the AVR-4308 / AVR-3808 and monitor are connected with an
HDMI cable, if the monitor is not compatible with HDMI audio signal
playback, only the video signals are output to the monitor.
• The audio signals input from the analog, digital and EXT. IN connectors
are not output to the monitor.
NOTE
When “HDMI Control” (
v
page 5) is set to “ON”, HDMI cannot be
assigned to “TV/CBL”.
When “HDMI Control” is set to “ON”, the digital input connector
assigned to ”TV/CBL” changes to “Optical3”.
Setup
Parameter
Audio
Adjust various audio parameters.
F
Menu tree
F
Parameter
Audio
a
Surround Parameters
s
Audyssey Settings
a
Surround Parameters
Adjust surround sound parameters.
The adjustable parameters differ for the different surround
modes.
NON MTRX
MTRX ON
PL
II
x CINEMA
z
1
PL
II
x MUSIC
z
2
ES MTRX
z
3
ES DSCRT
z
4
DSCRT ON
OFF
z
1: This can be selected when “Surround Back” is set to “2spkrs”
at the GUI menu “Manual Setup” – “Speaker Setup” – “Speaker
Confi guration” setting.
z
2: This can be selected when “Surround Back” is set to “2spkrs”
or “1spkr” at the GUI menu “Manual Setup” – “Speaker Setup”
–“Speaker Confi guration” setting.
z
3: This can be selected when playing DTS sources.
z
4: This can be selected when playing DTS sources including a
discrete 6.1-channel signal identifi cation signal.
SB CH Out
(for Multi-channel sources
)
Select playback mode for surround back channels.
[Selectable items]
When using the surround back speaker, you can change the “SB
CH Out” setting by pressing
STANDARD
.
s
Audyssey Settings
Select Room EQ, Dynamic EQ and Dynamic Volume.
Room EQ
[Selectable items]
Audyssey
: Optimize frequency response of all speakers.
Audyssey Byp. L/R
: Optimize frequency response of speakers
except front L and R speakers.
Audyssey Flat
: Optimize frequency response of all speakers
to fl at response.
Manual
: Apply frequency response set with “Manual
EQ”.
OFF
: Turn equalizer off.
Operating from the main unit or main remote
control unit
Press
ROOM EQ
.
Audyssey
Audyssey Byp. L/R
Audyssey Flat
Manual
OFF
• When “Audyssey”, “Audyssey Byp. L/R” or “Audyssey Flat” is
selected, “
” lights.
• After running Auto Setup, if the Speaker Confi guration, Distance,
Channel Level, and Crossover Frequency have changed without
increasing the number of speakers measured, only “
”
lights.
• “Audyssey”, “Audyssey Byp. L/R” and “Audyssey Flat” can be
selected after the auto setup procedure has been performed.
• After performing “Auto Setup”, the “Room EQ” setting automatically
becomes “Audyssey”.
• If the settings of speakers for which “None” has been determined
at “Auto Setup” are changed, “Audyssey”, “Audyssey Byp. L/R”
and “Audyssey Flat” cannot be selected. Either perform Auto Setup
again, or return to the setting after running Auto Setup with “Auto
Setup” – “Parameter Check” – “Restore”.
• When using headphones or EXT. IN mode, “Room EQ” cannot
used.
AVR4308ACI-3808ACI_E2A_2nd.indd 7
2008/08/25 10:13:32
