27
Setting the Auto Surround Mode
The surround mode used at last for the three types of input signals shown below is stored in the memory, and the signal is automatically played
with that surround mode the next time it is input.
Note that the surround mode setting is also stored separately for the different input sources.
q
Analog and PCM 2-channel signals
w
2-channel signals of Dolby Digital, DTS or other multi-channel format
e
Multi-channel signals of Dolby Digital, DTS or other multi-channel format
1
At the System Setup Menu select “Auto Surround
Mode” and press the ENTER button.
2
Select “ON” if you want to use the auto surround mode, “OFF” if you
do not want to use it.
3
Enter the setting.
The System Setup Menu reappears.
Setting the On Screen Display (OSD)
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
1
At the System Setup Menu select “On Screen Display”
and press the ENTER button.
2
3
Select “ON” or “OFF”.
Enter the setting.
The System Setup Menu reappears.
