26
Calculation
Set up speakers (Audyssey® Setup)
11
Repeat step 10, measuring positions 3 to 6.
When measurement of position 6 is completed, a
“Measurements finished.” message is displayed.
Audyssey Setup
Repeat Last Test
Calculation
Measurements finished.
12
Select “Calculation” and then press
ENTER
.
Measuring results are analyzed, and the frequency response of
each speaker in the listening room is determined.
Audyssey Setup
Calibration completed! Now calculating...Please wait.
50%
•
Analysis takes several minutes to complete. The more speakers
and measurement positions that there are, the more time it takes
to perform the analysis.
Measurement (2nd – 6th)
•
In this step, you will perform measurements at multiple positions
(two to six positions) other than the main listening position.
•
Just one position can be measured but measuring multiple positions
increases the accuracy of the correction of acoustic distortion within
the listening area.
10
Move the setup microphone to
position 2, select “Continue”,
and then press
ENTER
.
The measurement of the second
position starts. Measurements can be
made in up to six positions.
Audyssey Setup
Calculation
Continue
Place the microphone at ear level at the 2nd listening position,
then select “Continue”...
•
To skip measuring the third and subsequent listening position, use
ui
to select “Calculation” and press
ENTER
to proceed to step
13.
•
To measure the second position again, use
ui
to select “Retry
2nd Position” and press
ENTER
.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion
v
See overleaf
