ENGLISH
15
Connecting the ZONE2 jacks
• If another pre-main (integrated) amplifier is connected, the ZONE2 jacks can be used to play a different program source in ZONE2 at the same
time.
L
R
+
+
OUTPUT
INPUT
AUX OUT
B
ZONE2
RC-616
INFRARED RETRANSMITTER
Integrated pre-main amplifier
RC-617
INFRARED SENSOR
Connecting the SURROUND BACK / ZONE2 speaker system
To use the surround back speaker in the MAIN ZONE:
•
Set the POWER AMP ASSIGN switch to “SURR. BACK”
. Then plug in the AC main again.
• The same signal is output simultaneously to the SURR. BACK A and B terminals.
To use the ZONE2 speaker system in ZONE2:
•
Set the POWER AMP ASSIGN switch to “ZONE 2”
. Then plug in the AC main again.
• The same signal is output simultaneously to the ZONE 2 A and B terminals.
NOTE:
• To use surround back with one speaker, to SURR. BACK A CH.
Surround back speaker can be used A + B.
NOTE:
• To use ZONE2 with one speaker, to ZONE2 A CH.
ZONE2 speaker can be used A + B.
(A)
(B)
MAIN ZONE
(A)
(B)
ZONE2
(Rear panel)
(Rear panel)
