Denon AVC-X8500H, Руководство по обслуживанию

Страница: 154 / 209

Paths to be confirmed Display Settings What to confirm
8
Analog Amp Assign
(Amp Assign :
ZONE3)
fig.A08
A08:ASSIGN-Z3
Input Source : CBL/SAT
Input Mode : Auto
Sound mode : STEREO
Z3 Source : Source
Amp assign : 11.1ch + ZONE3
Speaker for ZONE3 : Height2
Floor Layout : 5ch
Height Sp : 2ch
Dolby Sp : None
Height Layout : Front Height/Rear Height
MAIN ZONE : On
ZONE2 : Off
ZONE3 : On
・ Analog input ⇒ Speaker output (Height2 L/R (ZONE3 L/R))
・ Analog input ⇒ Pre OUT output (ZONE3 L/R)
(
b
The input source can be switched to any source except CBL/SAT.)
(
b
Volume 60 is the value when Absolute settings are used. The value is -20 when Relative set-
tings are used)
9
Analog Amp Assign
(Amp Assign :
ZONE2/ZONE3-
MONO)
fig.A09
A09:ASSIGN-Z2/3M
Input Source : CBL/SAT
Input Mode : Auto
Sound mode : STEREO
Z2 Source : Source
Z3 Source : Source
Amp assign : 11.1ch + ZONE2/3
Speaker for ZONE2/3 : Height3
Floor Layout : 5ch&SB
Height Sp : 4ch
Dolby Sp : None
Height Layout : Front Height/Top Middle
MAIN ZONE : On
ZONE2 : On
ZONE3 : On
・ Analog input ⇒ Speaker output (Height3 L (ZONE2 MONO), Height3 R (ZONE3 MONO))
・ Analog input ⇒ Pre OUT output (ZONE2 L/R MONO, ZONE3 L/R MONO)
(
b
The input source can be switched to any source except CBL/SAT.)
( b Volume 60 is the value when Absolute settings are used. The value is -20 when Relative set-
tings are used)
10
Amp Assign
(Amp Assign :
BiAMP)
fig.A10a
fig.A10b
A11:ASSIGN-BiAMP
Input Source : CBL/SAT
Input Mode : Auto
Sound mode : MULTI CH STEREO
Amp assign : 11.1ch + BiAMP
Speaker for Bi-Amp : S.Back
Floor Layout : 5ch
Height Sp : 6ch
Dolby Sp : None
Height Layout : Front Height/Top Middle/Rear Height
MAIN ZONE : On
ZONE2 : Off
ZONE3 : Off
・ Analog input ⇒ Speaker output (S.Back L/R)
(
b
The input source can be switched to any source except CBL/SAT.)
(
b
Volume 60 is the value when Absolute settings are used. The value is -20 when Relative set-
tings are used)
11 Front Height
fig.A11a
fig.A11b
A14:FRONT HEIGHT
Input Source : CBL/SAT
Input Mode : Auto
Sound mode : MULTI CH STEREO
Amp assign : 13.1ch
Floor Layout : 5ch&SB
Height Sp : 6ch
Dolby Sp : None
Height Layout : Front Height/Top Middle/Rear Height
Speaker Select=Floor & Height
MAIN ZONE : On
ZONE2 : Off
ZONE3 : Off
・ Analog 入力 ⇒ Speaker 出力
(Height1 L/R (Front Height), Height2 L/R (Rear Height), Height3 L/R (Top Middle))
・ Analog input ⇒ Pre OUT output
(Height1 L/R (Front Height), Height2 L/R (Rear Height), Height3 L/R (Top Middle))
・ Pre OUT output
(
b
The input source can be switched to any source except CBL/SAT.)
( b Volume 60 is the value when Absolute settings are used. The value is -20 when Relative set-
tings are used)
12 Front Wide
fig.A12a
fig.A12b
A15:FRONT WIDE
Input Source : CBL/SAT
Input Mode : Auto
Sound mode : MULTI CH STEREO
Vol. : 60.0(-20.0dB)
Amp assign : 13.1ch
Floor Layout : 5ch&SB&FW
Height Sp : 4ch
Dolby Sp : None
Height Layout : Front Height/Rear Height
Speaker Select=Floor & Height
MAIN ZONE : On
ZONE2 : Off
ZONE3 : Off
・ Analog input ⇒ Speaker output (Height4, Front Wide L/R)
・ Analog input ⇒ Pre OUT output (Height4, Front Wide L/R)
・ Pre OUT output
(
b
The input source can be switched to any source except CBL/SAT.)
(
b
Volume 60 is the value when Absolute settings are used. The value is -20 when Relative set-
tings are used)
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
154