9
Rear Panel
1.
Analog Input, Balanced XLR:
Use standard XLR cables to connect these inputs to your
sound souce, such a microphone.
2.
Analog Input, Unbalanced RCA:
Use standard RCA stereo cables to connect these inputs
to your sound source, such as a CD player.
3.
Digital Input, Digital XLR:
Use a digital XLR cable (IEC60958 Type I, AES/EBU) to connect
this input to your sound source.
4.
Digital Input, Digital RCA:
Use digital RCA cables (IEC60958 Type II, S/PDIF coaxial) to
connect this input to your sound source.
5.
Analog Output, Balanced XLR:
Use standard XLR cables to connect these outputs to
external speakers, a sound system, etc.
6.
Analog Output, Unbalanced RCA:
Use standard RCA stereo cables to connect these
outputs to external speakers, a sound system, etc.
7.
Digital Output, Digital XLR:
Use a digital XLR cable (IEC60958 Type I, AES/EBU) to
connect this output to your sound system.
8.
Digital Output, Digital RCA:
Use digital coaxial RCA cables (IEC60958 Type II, S/PDIF
coaxial) to connect this output to your sound system.
9.
LAN Port:
Use a standard Ethernet cable (IEEE 802.3u (3.3V I/O) / 10/100 Base-T(X) / RJ-45)
to connect this port to a network switch or router.
10.
Dante Port:
Use a standard Ethernet cable to connect DN-900R to a Dante network from
this port. Dante channel routing is set using the Dante Control software, available for
download at
audinate.com/products/software/dante-controller
.
11.
RS-232C Terminal:
Use a 9-pin D-sub connector to connect a host device such as a
computer to DN-900R to control it using serial commands.
Note:
Visit
to download the
Serial Protocol Guide
for more information.
12.
AC Input:
Use the included power cable to connect this input to a power outlet.
3
5
6
10
11
12
1
2
4
7 8 9
Содержание DN-900R
Страница 69: ...69 ...
Страница 72: ...denonpro com Manual Version 1 0 ...
